GERALD G. SIMPSON, APPELLANT,
v.
THE COATS COMPANY, INC., APPELLEE
AI-generated. These summaries, headnotes, and key points are machine-generated and may contain errors or omissions. Always verify against the full opinion text below. Not legal advice.
A service station operator appealed a directed verdict in a personal injury action against the manufacturer of a tire-changing machine. The plaintiff was injured when a tire exploded while being repaired, but the court found the machine was not defective and was not the proximate cause of the injury, affirming the judgment for the defendant manufacturer.
The machine was neither defective in design nor manufacture, and the exploding tire—not the tire-changing machine—was the proximate cause of the accident. The machine's purpose was not to prevent tire explosions or contain them if they occurred, and there was no evidence that use of the machine caused the explosion.
[1] A manufacturer or distributor of a tire changing machine is not liable for injuries caused by an exploding tire when there is no evidence of a defect in the machine's des…
[2] An exploding tire, rather than a tire changing machine, can be the proximate cause of an accident if the machine was not designed to prevent explosions or hold down explo…
Previewing 2 of 3 headnotes on this case. FLexlaw’s editorially structured points of law — every proposition, pinpointed — are reserved for members.
Join FLexlaw to unlock all legal intelligence“There is no evidence in the record that the machine was defective nor that the design caused the accident. The purpose of the machine was not to prevent a tire from exploding nor to hold it down if it did explode.”
Establishes that the machine performed its intended function and was not designed to prevent or contain tire explosions
Previewing 1 of 3 key quotes on this case — the court’s exact language, pinpointed for members.
Join FLexlaw to unlock all legal intelligenceSimpson owned and operated a service station and was repairing a tire using a tire-changing machine manufactured by Coats Company. The machine consist…
The full statement of facts, procedural history, and disposition for this case are member content.
Join FLexlaw to unlock all legal intelligence© FLexlaw, Inc. — AI-generated enrichments are proprietary. All rights reserved.
Explore caselaw by topic → Browse Directed Verdict cases and more on FLexlaw
BOYER, Acting Chief Judge.
Appeal is here taken from a final judgment entered pursuant to a directed verdict in favor of the defendant below, appellee here, and from an order denying a timely motion for new trial.
Appellant owned and operated a service station and garage. The accident which gave rise to this litigation occurred while appellant was repairing a tire, using a machine manufactured and distributed by appellee. The machine was constructed in the form of a metal stand with a horizontal platform upon which a tire and wheel would be placed. Rising vertically from the platform was a threaded steel shaft around which would be placed the center aperture of the wheel and tire to be repaired. Another part of the tire changing machine or device was a heavy cast iron hold-down nut or cone with interior threads which would mesh with the threads on the vertical shaft. After the tire and wheel were placed over the vertical shaft onto the horizontal platform, the cone would be placed on the shaft and screwed down until it was tight against the wheel, for the purpose of holding the wheel firmly in place while the tire was being changed. If the tire were inflated while the hold-down cone was securely in place, the swelling of the tire as a result of inflation would cause the cone to be so bound in place that in order to remove the cone the tire would have to be deflated or the cone would have to be knocked loose with a heavy hammer before the tire and wheel could be removed from the machine. Therefore, it was necessary to either remove the cone from the vertical shaft or back it off a few turns before inflating the tire.
At the time of the subject accident appellant had loosened the cone and left it on the shaft prior to inflating a repaired tire. The tire exploded causing the cone and the tire mounted on the wheel to rise with great force, striking appellant and injuring him.
There is no evidence in the record that the machine was defective nor that the design caused the accident. The purpose of the machine was not to prevent a tire from exploding nor to hold it down if it did explode. Neither was there any evidence that the use of the machine caused the explosion nor the accident. This is not a case of faulty design nor defective manufacture. The exploding tire was the proximate cause of the accident, not the tire changing machine supplied by appellee. (See Menking v. Bishman Manufacturing Company, 496 S.W. 2d 762 (Ct. of Civ. App.Tex., 1973))
The learned trial judge was therefore eminently correct when he directed a verdict in favor of appellee.
Affirmed.
JOHNSON, J., concurs.
SPECTOR, SAM, Retired, Associate Judge, dissents.
SPECTOR, SAM, Associate Judge
(Retired) dissenting:
I respectfully dissent from the majority decision herein. In my view, there was sufficient evidence from which the jury could infer that the tire changing device was faultily designed and therefore the question as to the proximate cause of the injury, i. e., the design or the tire explosion, should have been submitted to the jury and not disposed of by directed verdict as in the case at bar.